Partnering with our customers and suppliers to provide engineered solutions
Fully welded construction
Large receiving hopper
Heavy duty main pedestal
Drop in style, oil lubricated bearing assembly having ample dimensioned spherical roller bearings
Hydraulic lid lifter mechanism
Externally adjustable feed tube system with a convenient inspection door mounted on the lid, provides safe and easy inspection
Lid and main frame protection with special alloy wear resistant liners
Tungten carbide component on rotor
Preparations for water spray piping system mounting to avoid material build up underneath rotor
V Belt drive guard prevents dust intrusion to the V Belt drive
Air transfer system enables internal air circulation and reduces dust emission
Bearing assembly mounted into a rigid base frame support provides maximum strength ideal for large feed or high speed applications
Flexible crushing chamber options
Modular oil system includes 160 liters(42 gallons) oil tank, gear pump, relief valves for low pressure oil circulation and high pressure lid lifter circuits, low flow rate shut down switch, oil heater, oil level gauge, oil temperature and lube oil pressure gauges
Safety features includes; open lid safety lock, low oil flow rate and high oil temperature shut off switches.
Excessive vibration alarm system that includes a maintenance alarm to alert you to potential problems. If excess vibration occurs, the vibration switch will shut down the crusher to protect it from possible damage.
Dual drive design reduces the radial and thrust loading on the electric motors, resulting in an extra-long service life for the motors.
APPLICATION OF CLOSED ROTOR AND ROCK SHELF ROCK ON ROCK (ROR)
ROR configurations are recommended when crushing the most abrasive materials, in tertiary and quaternary applications where additional fines production is desired.
Autogenous crushing occurs inside crusher chamber between material thrown from rotor and material resting on rock shelf or material springing back from rock shelf.
Production of cubical high quality aggregates and sand from highly abrasive input materials, such as gravel, granite, quartzite etc
Crushing of highly abrasives materials, such as aluminum oxide, ferrosilicon, abrasives, glass etc
Selective crushing of slags from steel mills, waste incineration plants etc.
APPLICATION OF CLOSED ROTOR AND ANVIL RING ROCK ON STEEL (ROS)
Impact crushing on anvils and also autogenous crushing between material springing back from anvils and material thrown from rotor occurs at the same time.
This type of crushing is recommended for low and medium abrasive materials such as gravel, limestone, dolomite, diabase, bricks, cement clinker etc
Production of cubical and high quality sand can be achieved.
Additional fine production can be obtained with higher rotor speeds.
Selective crushing of conglomerates, moderately abrasive slags, industrial minerals, mining overburden etc
Recycling of asphalt and unreinforced concrete waste.
APPLICATION OF OPEN TABLE ROTOR AND ANVIL RING STEEL ON STEEL (SOS)
Impact crushing occurs on anvil.
This type of crushing is recommended for non abbrasive or low abrasive materials, such as limestone, in secondary and tertiary crushing applications with larger feed sizes.
Selective crushing of moderately abrasive slags, industrial minerals, mining overburden etc.
High capacity production of cubical and high quality sand can be obtained.
incorporating technology and experience to meet our customers required performance parameters
utilizing our extensive supply chain network to provide customized, cost effective solutions
dynamic strategies to achieve on budget and on time projects